manualshive.com logo in svg

Xerox Document Binder 120, Operator'S Manual

Share
Download
Xerox Document Binder 120 Operator'S Manual Download Page 55

MAKING THE BOOKS

XEROX DOCUMENT BINDER 120 OPERATOR MANUAL

4-7

Loading the cassettes into the Cover Trays procedure

Follow the procedure below to replace an empty cassette or to
exchange a cassette for another having a different size spine width
or cover type.

1.

Press the Unlock button for the Cover Tray.

•

The amber Please Wait indicator light will go on to advise
you that the Cover Tray is unlocking.

•

When the Cover Tray is unlocked, the green Ready to Open
indicator light will go on.

NOTE:

  You must press the Unlock button only if the Cover Tray

you are loading currently contains covers.  When a Cover Tray
is empty, the Binder 120 automatically unlocks the Cover Tray
for you.

2.

Pull open the Cover Tray.

3.

Remove the cassette from the Cover Tray.

0 312033B-SBR

Summary of Contents for Document Binder 120











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands