Xerox Document Binder 120, Operator'S Manual

Page: 14 / 138

TECHNICAL DATA
8-2 XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
Product specifications
The table below contains the product specifications for the Binder
120.
Automatic operation Capable with Xerox 5100, 5800 family, and 5680/5892 host machines. The Binder
120 is shipped with a Third Party Enablement Kit. When installed on a Xerox
5100, 5800 family, or 5680/5892 product, the kit enables the Binder 120 to operate
as an accessory to the host machine. Each kit is for one host machine only.
Additional host machines require additional kits.
Binding speed Accepts approximately one copy set per 2 seconds
Book output time Approximately 2.0 minutes from the time of entrance of a copy set into the Binder
120 until the book is available in the Output Tray
Book capacity
?
On-line: 5 to 100 sheets
?
Manual: 1 to 120 sheets
Output Tray capacity 20 to 80 books depending on the spine width
Cover Tray capacity
?
Cover Tray 1: 1 cover cassette (150 covers)
?
Cover Tray 2: 1 cover cassette (150 covers)
Warm-up time
?
From the Off position: Approximately 2 minutes
?
From the Energy Saver mode: Approximately 2 minutes
Electrical requirements
?
Standard office outlet
?
United States/Xerox Canada Limited: 115 VAC, 60 HZ
?
Xerox Limited: 230 VAC, 50 HZ
Environmental requirements
?
Minimum: 50
?
F (10
?
C) at 15% relative humidity
?
Maximum: 90
?
F (32
?
C) at 85% relative humidity
Machine dimensions
?
Height to Output Tray: 38 inches (965 mm)
?
Height to top of Output Tray cover: 48 inches (1200 mm)
?
Width: 23 1/2 inches (597 mm)
?
Length with Interface Module down: 47 inches (1194 mm)
?
Length with Interface Module up: 59 1/4 inches (1505 mm)