Xerox D95 User Manual Download Page 431

Page: 431 / 460

2. Open the right cover on the finisher.

3. Pull out the folder output tray ( 2d), swing lever the 2g, and remove the jammed

paper.

Note

If paper is torn, check inside the machine and remove it.

4. Return the opened lever ( 2g) to its original position, and close the output tray ( 2d).

5. Close the right cover on the finisher.

Note

A message will display and the machine will not operate if the right cover is open
even slightly.

24-27

Xerox

D95/D110/D125/D136 Copier/Printer

User Guide

Standard Finisher Plus

Summary of Contents for D95













































































































































































































































































































































































































































































Search results

Summary of Contents for D95

Reviews:

Related manuals for D95

Brands by name

Popular brands

Xerox D95, User Manual

Search results

Summary of Contents for D95

Reviews:

Related manuals for D95

Brands by name

Popular brands