Xerox D95 User Manual Download Page 354

Page: 354 / 460

Note

If paper is torn, check inside the machine and remove it.

4. Return the opened lever ( 2g) to its original position, and close the output tray ( 2d).

5. Close the right cover on the finisher.

Note

A message will display and the machine will not operate if the right cover is open
even slightly.

Paper jams at unit 4 and knob 4a

1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.

3. Pull out unit 4.

User Guide

22-26

Standard/Booklet Maker Finisher

Summary of Contents for D95













































































































































































































































































































































































































































































Search results

Summary of Contents for D95

Reviews:

Related manuals for D95

Brands by name

Popular brands

Xerox D95, User Manual

Search results

Summary of Contents for D95

Reviews:

Related manuals for D95

Brands by name

Popular brands