Xerox D95 User Manual Download Page 87 | Manualshive

Page: 87 / 460

Xerox D95 User Manual Download Page 87

Resolution

You can select preset resolution settings.
1. From the Advanced Settings tab, select Resolution...
2. Specify the image resolution.
3. Select Save.

Note

When File Format > MRC High Compression or OCR is set to On, only 200 dpi and
300 dpi are available.

Quality/File Size

This feature allows you to select the ratio of data compression for color and grayscale
scanned images.

Note

This feature is unavailable whenever Black and White is selected.

1. From the Advanced Settings tab, select Quality/File Size...
2. Use the right or left button to specify the output quality/file size.

Note

Only three compression levels are available when MRC High Compression is enabled
under PDF Multiple Pages per File in File Format.

3. Select Save.

Photographs

The Photographs enhancement feature is available if Color is selected from the Color
Scanning section of a tab screen.
1. From the Advanced Settings tab, select Photographs...
2. Select Off or Enhance Photographs:

• Off: Disables the feature.
• Enhance Photographs: Enhances images scanned from color photographs with

Output Color set to Full Color.

3. Select Save.

Note

When Enhance Photographs is selected, Shadow Suppression and Background
Suppression are not available.

5-23

Xerox

®

D95/D110/D125/D136 Copier/Printer

User Guide

Scan

«
...
85
86
87
88
89
...
»

Summary of Contents for D95













































































































































































































































































































































































































































































Reviews:

No comments