Xerox D95, User Manual, Page: 313 / 460

Tip
During larger binding jobs, the trimmer waste tray may require emptying more
frequently.
1. Open the trimmer waste tray.
2. Lift and remove the inside tray/bin.
3. Empty the contents of the tray/bin into a waste container.
4. Visually check to ensure that all scraps are removed from the tray area of the machine.
5. Reinstall the tray/bin into the trimmer waste tray.
6. Gently close the trimmer waste drawer.
Adhesive filling tray
Read the following before performing this procedure:
• The adhesive supply may be replenished while the binder is in operation.
• Use only the specified adhesive for use in the binder. Any other adhesive may result
in binder malfunction.
• Store the adhesive in a cool, well-ventilated area and away from high temperature
and humidity. The adhesive may combust if placed in an area with open flame or
high temperature.
• Do not over-fill the adhesive replenishment hopper; otherwise the covers may not
close properly and adhesive pellets may get into other areas of the binder causing
malfunctions.
• Do not use adhesive pellets that have fallen on the floor as they may contain dirt
and dust which may cause binder malfunctions.
• Do not place anything other than the adhesive pellets into the adhesive replenishment
hopper as this may cause a fire in the binder.
• The adhesive pellets are transferred to the binder as the supply in the binder is
consumed. The binder can contain about 0.8 pounds (380 grams) of adhesive.
21-21 Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
Perfect Binder (D110/D125/D136 with integrated controller)