manualshive.com logo in svg

Xerox D95, User Manual, Page: 257 / 460

Share
Download
Xerox D95 User Manual Download Page 257

The amount of curl correction is changed by selecting a related button. The current
selected amount of curl correction is displayed by the Control Panel LEDs.

Problem solving

Clearing jams

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.

Note

Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.

Paper jams at lever 1a

1. Open the front cover of the module.

2. Move the lever  1a downward and remove the jammed paper.

19-5

Xerox

®

 D95/D110/D125/D136 Copier/Printer

User Guide

Interface Module/Interface Cooling Module

Summary of Contents for D95













































































































































































































































































































































































































































































Reviews:

No comments