Xerox D95 User Manual Download Page 224

Page: 224 / 460

3. Remove the jammed paper.

Note

If paper is torn, check inside the machine and remove it.

4. Close the lower left cover.
5. Close the front cover of the HCF completely.

Note

The machine will not operate if the cover is open even slightly.

Paper jams at lever 1a and knob 1c

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.

1. Open the front cover of the HCF.

User Guide

17-6

High Capacity Feeder (HCF/Trays 6 and 7), 8.5 x 11 in./A4

Summary of Contents for D95













































































































































































































































































































































































































































































Search results

Summary of Contents for D95

Reviews:

Related manuals for D95

Brands by name

Popular brands

Xerox D95, User Manual

Search results

Summary of Contents for D95

Reviews:

Related manuals for D95

Brands by name

Popular brands