Xerox D95 User Manual Download Page 423

Page: 423 / 460

Paper jams at lever 3e and knob 3c

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.

1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.

3. Move the lever 3e and turn the knob 3c; remove the jammed paper.

Note

If paper is torn, check inside the machine and remove it.

4. Return the lever 3e its original position.

24-19

Xerox

D95/D110/D125/D136 Copier/Printer

User Guide

Standard Finisher Plus

Summary of Contents for D95













































































































































































































































































































































































































































































Search results

Summary of Contents for D95

Reviews:

Related manuals for D95

Brands by name

Popular brands

Xerox D95, User Manual

Search results

Summary of Contents for D95

Reviews:

Related manuals for D95

Brands by name

Popular brands