manualshive.com logo in svg

Xerox D95, User Manual, Page: 171 / 460

Share
Download
Xerox D95 User Manual Download Page 171

7. Close the front cover completely. The machine will not operate if the front cover is

open even slightly.

Paper jams inside the main unit

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.

Warning

Never touch a labeled area (found on the fuser unit or nearby) indicating High
Temperature and Caution. Contact can lead to burns.

1. Make sure that the machine has stopped printing before opening the front cover.

2. Turn the green lever at the center of the transfer module to the right until it is in the

horizontal position and then pull the transfer module out to the end.

15-13

Xerox

®

 D95/D110/D125/D136 Copier/Printer

User Guide

Problem solving

Summary of Contents for D95













































































































































































































































































































































































































































































Reviews:

No comments