manualshive.com logo in svg

Xerox D95, User Manual, Page: 220 / 460

Share
Download
Xerox D95 User Manual Download Page 220

Loading media into the HCF (Trays 6 and
7)

1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. To change the paper size, perform the following:

a) Remove any paper currently loaded in the tray.
b) Loosen the two screws to remove the guides.

c) Adjust the guides to fit the new paper size and retighten the two screws.

4. Open the ream of paper with the seam side facing up.
5. Fan the sheets before loading them into the tray.
6. Load and align the edge of the paper against the RIGHT edge of the tray.

7. Gently push in the tray until it comes to a stop.

If enabled by your System Administrator, the Paper Tray settings screen may be
displayed on the UI.

User Guide

17-2

High Capacity Feeder (HCF/Trays 6 and 7), 8.5 x 11 in./A4

Summary of Contents for D95













































































































































































































































































































































































































































































Reviews:

No comments