Xerox D95 User Manual Download Page 433

Page: 433 / 460

Paper jams at the finisher output area

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.

This section describes how to remedy paper jams that occur at the following locations:

• Paper jams at the finisher top tray
• Paper jams at the finisher stacker tray

Note

Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.

Paper jams at finisher top tray

1. Make sure that the machine has stopped printing.
2. Remove jammed paper from the finisher top tray.

Note

If paper is torn, check inside the machine and remove it.

3. Open and close the finisher right cover.

Note

The machine will not operate if the cover is open even slightly.

24-29

Xerox

D95/D110/D125/D136 Copier/Printer

User Guide

Standard Finisher Plus

Summary of Contents for D95













































































































































































































































































































































































































































































Search results

Summary of Contents for D95

Reviews:

Related manuals for D95

Brands by name

Popular brands

Xerox D95, User Manual

Search results

Summary of Contents for D95

Reviews:

Related manuals for D95

Brands by name

Popular brands