Xerox D95 User Manual Download Page 297

Page: 297 / 460

Cover inserter

1 Cover inserter tray

This tray is for loading cover media and inserts that will be bound to the book block
during the binding process.

2 Paper width guide

Adjust this guide so that it touches the loaded media in the tray.

3 Inserter cover

Open this cover to access internal components.

4 Inserter inner cover

Open this cover to clear jams.

5 Right inserter baffle

Open this baffle to clear jams.

21-5

Xerox

D95/D110/D125/D136 Copier/Printer

User Guide

Perfect Binder (D110/D125/D136 with integrated controller)

Summary of Contents for D95













































































































































































































































































































































































































































































Search results

Summary of Contents for D95

Reviews:

Xerox D95, User Manual, Page: 297 / 460

Search results

Summary of Contents for D95

Reviews: