manualshive.com logo in svg

Xerox D95, User Manual, Page: 342 / 460

Share
Download
Xerox D95 User Manual Download Page 342

Note

Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.

Paper jams in Tray 8/T1 (Post-Process Inserter)

1. Press the  Cover button.

2. Open cover  1e and then remove the jammed paper and all paper loaded in the tray.

Note

If paper is torn, check inside the machine and remove it.

3. Fan the paper you removed, making sure that all four corners are neatly aligned, and

then load them again.

4. Push cover  1e until you hear it click into place.

Note

A message is displayed and the machine does not operate if the cover is open even
slightly.

User Guide

22-14

Standard/Booklet Maker Finisher

Summary of Contents for D95













































































































































































































































































































































































































































































Reviews:

No comments