Xerox D95, User Manual

Page: 174 / 460

9. Close the front cover completely. The machine will not operate if the front cover is
open even slightly.
Fault codes
Cause and Remedy Fault code
Cause: Unable to process job template due to insufficient hard disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space. 002-770
Cause: Unable to store any documents with 2 Sided Book Copy feature.
Remedy: Check the 2 Sided Book Copy settings. 003-750
Cause: The machine is unable to process size, because the specified document
area is too small.
Remedy: Increase resolution or scan area size. 003-751
Cause: The selected resolution was too large for scanning mixed size originals
using document feeder.
Remedy: Decrease Scan Resolution to 200dpi or less, and rescan. 003-753
Cause: An error occurred in the document scanner.
Remedy: Reprocess the job. 003-754
Cause: An error occurred in the document scanner.
Remedy: Reprocess the job. 003-755
Cause: An incompatible combination of features is specified in the document scan
conditions.
Remedy: Check the selected options. 003-760
Cause: The paper size of the tray selected for auto tray is different from the paper
size of the tray selected for Auto Repeat.
Remedy: Change the paper size for the tray, or change the Paper Type Priority
settings. 003-761
Cause: No document is scanned by Form Overlay.
Remedy: Prepare 2 documents or more. 003-764
Cause: When enlarging/reducing a scanned document to the specified paper size,
the reduction/enlargement ratio value exceeds the allowed range.
Remedy: Take one of the following actions:
Manually enter a reduction/enlargement ratio.
Change the paper size. 003-795
Cause: An error occurred in the document feeder.
Remedy: Power-cycle the machine. Contact the Customer Support Center. 005-275
005-280
005-281
005-282
005-283
005-284
User Guide 15-16
Problem solving