Xerox D95 User Manual Download Page 303

Page: 303 / 460

8 Trimmer waste tray

Once the book edges are trimmed, the paper cuttings are deposited in the trimmer
waste tray.

9 Book stacker tray

Finally, the finished books are stacked in the book stacker tray.

Cover inserter path

1 Incoming print job

This paper path moves the incoming paper to the compiler tray.

2 Compiler tray

Upon arrival to the compiler tray, the paper is then assembled into a book block.

3 Sub-grip/main grip

The sub-grip and main grip move the book block to the adhesive unit.

4 Cover inserter

If desired, cover media is loaded into this tray.

5 Bypass transport

The bypass transport moves the cover media to the adhesive unit where it awaits the
book block.

21-11

Xerox

D95/D110/D125/D136 Copier/Printer

User Guide

Perfect Binder (D110/D125/D136 with integrated controller)

Summary of Contents for D95













































































































































































































































































































































































































































































Search results

Summary of Contents for D95

Reviews:

Related manuals for D95

Brands by name

Popular brands

Xerox D95, User Manual

Search results

Summary of Contents for D95

Reviews:

Related manuals for D95

Brands by name

Popular brands