manualshive.com logo in svg

Xerox D95, User Manual

The Xerox D95 is a high-performance multifunction printer designed for high-volume printing needs. It comes with an installation manual providing step-by-step instructions for effortless setup. Easily download the free manual from manualshive.com, enabling seamless functionality and optimal performance for your printing tasks.

Share
Download
background image

• Check the connection between the Interface Module/Interface Cooling Module and

the connected finishing device or devices.

• Fully clear any jams between the Interface Module/Interface Cooling Module and

the connection finishing device or devices.

• Ensure all jam clearance handles/levers are returned to their closed positions.

• After clearing all jams, remove any ejected paper from the finishing output area.

• Power Off/On the machine.

048-322

Cause:  Interface Module/Interface Cooling Module communication failure or
connection failure

Remedy:  Perform the following:

• Check the connection between the Interface Module/Interface Cooling Module and

the connected finishing device or devices.

• Fully clear any jams between the Interface Module/Interface Cooling Module and

the connection finishing device or devices.

• Ensure all jam clearance handles/levers are returned to their closed positions.

• After clearing all jams, remove any ejected paper from the finishing output area.

• Power Off/On the machine.

048-324

Cause:  Interface Module/Interface Cooling Module communication failure or
connection failure

Remedy:  Perform the following:

• Check the connection between the Interface Module/Interface Cooling Module and

the connected finishing device or devices.

• Fully clear any jams between the Interface Module/Interface Cooling Module and

the connection finishing device or devices.

• Ensure all jam clearance handles/levers are returned to their closed positions.

• After clearing all jams, remove any ejected paper from the finishing output area.

• Power Off/On the machine.

048-325

Cause:  Interface Module/Interface Cooling Module communication failure or
connection failure

Remedy:  Perform the following:

• Check the connection between the Interface Module/Interface Cooling Module and

the connected finishing device or devices.

• Fully clear any jams between the Interface Module/Interface Cooling Module and

the connection finishing device or devices.

• Ensure all jam clearance handles/levers are returned to their closed positions.

• After clearing all jams, remove any ejected paper from the finishing output area.

User Guide

19-12

Interface Module/Interface Cooling Module

Summary of Contents for D95













































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for D95

Olivetti Copia 9910 Operation Manual preview
Copia 9910
Brand: Olivetti Pages: 186
Canon PC920 Service Manual preview
PC920
Brand: Canon Pages: 393

Brands by name

Popular brands

Load more brands