Xerox 460, Installation And Troubleshooting Manual

Page: 82 / 210

Page 10 - 6 Xerox Document Centre Network Installation & Troubleshooting Guide
To
Create an IPP printer
a) Select Network Printer . Click Next .
b) Select Connect to a printer on the Internet or on your
intranet . Type HTTP:// followed by the printer's name
or IP address in the URL field. The Printer Name can be
either the Host Name or the SMB Host Name as shown
on the configuration report, depending on the name
resolution used by your network (WINS or DNS). Click
Next .
c) Click
OK
to install the printer driver. Go to Step 3.
3. Select the driver to be used (Document Centre drivers are
included on the Windows 2000 CD-ROM)
a) A driver list will be displayed. Select Xerox from the
Manufacturers: area. Then select the desired print
driver from the Printers: and click OK . The driver wil
be installed.
b) The Default Printer window will open. Select Yes to
make this the default printer, otherwise click the Next>
button.
c) At the Completing the Add Printer Wizard screen,
click the Finish button.
d) Test the installation. Open the Printers dialog and right-
mouse click the printer just created then select
Properties . At the General tab for the printer, click the
Print Test Page button. Verify that it prints.
e) Repeat this Go to the server/workstation and...
procedure for each workstation or server on the network
that will print to the printer.