Xerox 460, Installation And Troubleshooting Manual

Page: 32 / 210

Page 3 - 4 Xerox Document Centre Network Installation & Troubleshooting Guide
8. Press the Close button.
a) Press the Dynamic Addressing button. At the next
screen select DHCP or BOOTP and press Save .
9. Enable lp and lpr printing (skip steps 9a-9b if you DO NOT
wish to print to your Document Centre using lp or lpr.
a) Press the TCP/IP - Line Printer button. At the next
screen press the Enable button.
NOTE: While you can change the port number at which your Document
Centre will accept lpr print jobs it is recommended that you do this
ONLY with extreme caution as most lpr spoolers are set to send
print jobs to the default port.
b) If you wish to change the lpr port for your printer press
the port soft button and enter the desired port number at
the keypad. Press
Save .
c) Press the Close button.
10. Press the Exit Tools button.
a) Obtain a Configuration Report page from your printer.
Verify the TCP/IP information was assigned correctly.
b) Update the lease time (if necessary) at the DHCP or
BOOTP server depending on your printer usage patterns.
Consult your server documentation for details.