Xerox 460, Installation And Troubleshooting Manual

Page: 34 / 210

Page 3 - 6 Xerox Document Centre Network Installation & Troubleshooting Guide
Dynamic Addressing (RARP)
If your printer is equipped with a Token Ring interface, prior to
connecting your printer to your network, use the section of this
document entitled
Token Ring Interface Network Connection to
set the Ring Speed and Source Routing settings for your
environment. Then return to this procedure and follow the
instructions.
RARP servers vary in the information that they return to the host
computer requesting service. Your Document Centre can retrieve
the following values from a RARP server:
TCP/IP Address
Subnet Mask
Consult the documentation supplied with your RARP server
software to verify what TCP/IP information it is capable of
supplying.
Go to the RARP or BOOTP server and...
1. Configure the server with the TCP/IP information you want
assigned to your printer.
Go to the printer and...
2. Connect your Document Centre to the network with the
appropriate cabling.
3. Enter the Tools pathway
a) Press the Access ( ) button.
b) On the keypad enter 1111 or the current password. Press
the Enter button when finished. Press the Go to Tools
button.
c) The Touch Screen will be used for the remainder of the
data entry.