Xerox 460, Installation And Troubleshooting Manual

Page: 79 / 210

Xerox Document Centre Network Installation & Troubleshooting Guide Page 10 - 3
Wi
ndow
s 2000
LPR
an
d I
P
P P
rint
in
g
Wi
ndows 2
000 LP
R
and
IPP Printing
5. Set the Host Name
a) Press the Name/Address button.
b) One at a time press the soft buttons on the Touch Screen
for each Octet of the IP address and enter the numbers
from the keypad.
c) Press the Host Name button.
d) When the soft keypad appears, type the host name
EXACTLY as you want it to appear with proper case.
When finished press the
Save button to record the
changes and exit to the TCP/IP Settings Screen.
6. Set the Subnet Mask and Gateway
a) Press the Subnet and Gateway button.
b) One at a time press the soft buttons on the Touch Screen
for each octet of the Subnet Mask and enter the numbers
from the keypad. Repeat this process for the IP Gateway
address. When finished press
Save to record the changes
and exit to the TCP/IP Settings Screen.
NOTE: The Broadcast Address will be calculated automatically.
c) Press the TCP/IP - Line Printer button. At the next
screen press the Enable button.
NOTE: While you can change the port number at which your Document
Centre will accept lpr print jobs, it is recommended that you do this
ONLY with extreme caution as most lpr spoolers are set to send
print jobs to the default port.
d) If you wish to change the lpr port for your printer press
the port soft button and enter the desired port number at
the keypad. Press
Save .
e) Press the Close button.