Xerox 460, Installation And Troubleshooting Manual

Page: 157 / 210

Xerox Document Centre Network Installation & Troubleshooting Guide Page 20 - 7
Scan Set
up
w
it
h
out
Cent
re
Wa
re
Scan S
etup w
ithou
t
C
en
tre
W
a
re
To perform network scanning, the Document Centre is installed on
a local area network. The protocol of the local area network must be
NetWare SPX/IPX or TCP/IP. For the user to retrieve the scanned
document file, it must be transferred to a file server. The scanning
and filing of the document are controlled by a scanning component
called a
scan template .
Scan Templates
The scan template is essentially a job ticket for the scanned job. The
template is user-programmable, and contains parameters for the
scanned document. The user can program parameters such as one-
sided or two-sided scanning, scanned image size, and the location on
the file server where the file will be stored.
The Default Template
A default scan template ( default.xst ) is created during the
installation of the scanning option and is stored on the Document
Centre. It is available for all scanning installations.
It is selected at the Document Centre Control Panel Touch Screen to
begin the scanning process.
NOTE The Native scanning installations described in this guide provide
only the
default.xst template for all scanning users.
In this environment, additional scan templates can easily be created
using only Xerox’s CentreWare Internet Services, or the
CentreWare Template Utility. You MUST refer to the
Internet
Services Guide to create templates with Internet Services, or the
Network Scanning Services Guide to use the CentreWare
Template Utility.