Xerox 460, Installation And Troubleshooting Manual, Page: 167 / 210

Xerox Document Centre Network Installation & Troubleshooting Guide Page 20 - 17
Scan Set
up
w
it
h
out
Cent
re
Wa
re
Scan S
etup w
ithou
t
C
en
tre
W
a
re
Set Up Scanning - NetWare
Before You Start
Prior to starting the installation procedure, perform the following
steps:
1. Ensure that the Document Centre is connected, configured, and
operating correctly as a printer.
2. Use the SYSCON utility for NetWare 3.x, or NWADMIN for
NetWare 4.x to create a user account on the file server for the
scanner.
3. Create a directory on the file server to be used as a repository for
scanned files. Give the scanner user account all access rights to
this directory, except supervisor. The repository name cannot
exceed 8 characters.
NOTE Refer to the NetWare documentation for additional information, if
needed.
When a document is scanned, the Document Centre logs into the
scanner user account with the user name and password, transfers
the file to the repository in the server, and then logs out.
NOTE The Document Centre supports TIFF File Formats.