Xerox 460, Installation And Troubleshooting Manual

Page: 27 / 210

Xerox Document Centre Network Installation & Troubleshooting Guide Page 2 - 5
How to Connec
t t
o
Et
her
net
or
T
oken
H
o
w to C
o
nne
ct
to
Eth
ern
et
or Toke
n
Rin
g
How to set the Hardware (MAC) Address
All Document Centre printers equipped with a Token Ring
interface have a default MAC address which will enable
communication on a Token Ring network. It is STRONGLY
recommended that you use caution when changing the MAC
Address of the network interface.
1. Access the Tools pathway.
a) Press the Access ( ) button.
b) Enter 1111 (or the current password) then press the
Enter button on the Touch Screen. Press the Go to
Tools button.
c) The Touch Screen will be used for the remainder of the
data entry.
2. Set or Change the MAC address.
a) Press the Connectivity and Network Setup button.
b) Press the Physical Media button.
c) Press the Token Ring button.
d) Press the Token Ring Settings button.
e) Press the MAC Address button.
f) Enter the six (6) hexadecimal pairs on the touch keypad
separated by colons.
g) When finished press Save .
h) Press the Exit Tools button.
3. Wait a MINIMUM of 7 minutes for the printer to reset.
a) Obtain a Configuration Report page from your printer
and verify that your Token Ring Settings have been
retained.
4. Connect your Document Centre to the network with the
appropriate cabling.