Xerox 460, Installation And Troubleshooting Manual

Page: 73 / 210

Xerox Document Centre Network Installation & Troubleshooting Guide Page 9 - 3
Mi
cros
oft (TC
P
/I
P)
Netw
o
rks
Mi
cr
os
of
t (
T
CP/
IP)
Ne
tw
orks
5. Set the LPR Host Name. (OPTIONAL: If you will not be
priniting to the Document Centre device with an LPR tool,
Skip to Step 6.)
a) Press the Name/Address button.
b) Press the soft buttons one at a time on the touch screen
for each Octet of the IP address and enter the numbers
from the keypad.
c) Press the Host Name button.
d) When the soft keypad appears, type the SMB host name
EXACTLY as you want it to appear with proper case.
When finished press the
Save button to record the
changes and exit to the TCP/IP Settings screen.
6. Set the Subnet Mask and Gateway.
a) Press the Subnet and Gateway button.
b) Press the soft buttons one at a time on the Touch Screen
for each Octet of the Subnet Mask and enter the numbers
from the keypad. Repeat this process for the IP Gateway
address. When finished press
Save to record the changes
and exit to the TCP/IP Settings screen.
c) Press the Close button.
NOTE: The Broadcast Address will be calculated automatically.