Xerox 460, Installation And Troubleshooting Manual

Page: 81 / 210

Xerox Document Centre Network Installation & Troubleshooting Guide Page 10 - 5
Wi
ndow
s 2000
LPR
an
d I
P
P P
rint
in
g
Wi
ndows 2
000 LP
R
and
IPP Printing
Go to the Server/Workstation and...
1. Verify the correct software is loaded
a) At the Desktop, right mouse click the My Network
Places icon and select Properties . Right mouse click on
the Local Area Connection icon and verify that the
Internet Protocol (TCP/IP) protocol has been loaded.
2. Add the printer
a) Open Control Panel and double click the Printers icon.
b) Double-click Add Printer . The Add Printer Wizard
starts. Click Next . (Follow the instructions below for
LPR printing OR to print with IPP follow the
instructions on the next page entitled
To Create an IPP
Printer )
To create a LPR Printer
a) Select Local Printer ; deselect Automatically detect
and install my Plug and Play printer. Click Next.
b) Select Create a new port and choose Standard
TCP/IP port from the pull-down menu. Click Next
twice.
c) Enter the Printer Name or its IP address . The Printer
Name can be either the Host Name or the SMB Host
Name as shown on the configuration report, depending
on the name resolution used by your network (WINS or
DNS). The
Port Name is automatically filled in for you
but you can change it if you want to. Click Next .
d) The Wizard will automatically detect the Printer Model
for you. If that does not happen select Standard and
choose the your Printer Model from the pull-down
menu.
e) Click Finish . Go to Step 3.