Xante PlateMaker 3, Manual

Page: 7 / 298

_________________________________________ Introduction 1-7
Simultaneously active serial, parallel, LocalTalk, and optional
Ethernet interfaces allow Macintosh and PC computers to send files
concurrently to the printer. You do not have to send software
commands or manually set hardware switches to use a different
interface.
Standard features include mirror and negative printing. With an
optional hard disk, you can spool multiple jobs and use XANTÉ’s
Font Accelerator to increase printing performance of printer disk
based fonts.
The Graphic Software Package offers the following advanced features:
• XANTÉ’s patented Accurate Calibration Technology (X-ACT)
allows you to calibrate printer line lengths and to correct
inaccuracies in printing width, height, skew, and angle.
• Halftone Calibration Technology and densitometer support allow
you to adjust image grayscale values and to calibrate printer
output for specific ink, media, and environmental conditions.
• Enhanced Screening increases the number of gray levels
produced for a line screen setting.
The Gripper Offset feature allows you to adjust image placement on
the media to ensure correct alignment for a press.
The XANTÉ Utilities include easy-to-use, menu-driven programs
and files to make working with your new printer more efficient.
Printer Configuration
Processor NEC VR 4310 166 MHz
RAM Standard - 64 MB
Upgradeable to 256 MB
Adobe PostScript 3: 136 PostScript Fonts
Resolution: Standard - 600 x 600 dpi, 1200 x 1200 dpi
Optional - 2400 x 2400 dpi