Xante PlateMaker 3, Manual

Page: 209 / 298

_______________________________________ Configuration 6-35
3. Close the Multipurpose Feeder.
Note: Check the print density dial when you replace a toner
cartridge. The setting required for the previous cartridge may
be too high or too low for the new cartridge.
Toner Page
The Toner Page feature automatically prints a toner reorder form
when the cartridge needs to be replaced. To order a new cartridge,
fill out the form and return it to XANTÉ or to your XANTÉ vendor.
If the feature is enabled and the toner is low, the reorder form prints
every 250 pages.
Set Toner Page from the MISC:TONER PAGE configuration menu.
Yes, the factory default, enables this feature; No disables it.
Tray Selection Options
You can select a specific tray as the default media source or you can
use tray chaining to automatically switch to another source for media
when the current source is empty.
Selecting a Specific Tray
Use the Tray Select control key or your application’s options to
select a specific tray as the media source. The Tray Select control
key allows you to scroll through tray options in the window. Options
are man feed (multipurpose feeder), cassette (standard cassette),
upper optional, and lower optional. The last two selections appear
only if these optional trays are installed.
In most Macintosh applications, use the Print dialog box Paper
Source options to specify the media tray.
• The All pages from options allow you to choose a specific tray
or use the printer’s default to print all pages of a job.
• The First page from and Remaining from options allow you to
specify one tray for the first page and a different tray for the rest
of the print job.