Xante PlateMaker 3, Manual

Page: 68 / 298

3-30 Macintosh Setup bb ____________________________________
4. Select Interfaces from the Configure box. The Select I/O
Interfaces to Spool window appears (fig. 3.13).
Fig. 3.13 Select I/O Interfaces to Spool Window
5. Select the interface that you use to send files to the printer;
then, click Ok. The Spooling window reappears.
6. Click Ok to close the Spooling Window. Choose File: Quit to
close Command Center.
Managing Jobs in the Spooler’s Job Queue
The spooler’s job queue can store up to 250 jobs. Jobs sent with the
Save Spooled Job option set to True in the Print dialog box are
retained indefinitely in the queue. A saved job can be reprinted
quickly from the Spooling menu without reprocessing the file
through an application. See “The PPD” in chapter 6, for details.
1. Open XANTÉ Command Center; then, choose General:
Spooling. The Spooling window (fig. 3.14) appears.