Xante PlateMaker 3, Manual

Page: 4 / 298

1-4 Introduction bb ________________________________________
About This Manual
This user’s guide covers PlateMaker 3 installation, setup, and
operation.
Chapter 1 —Introduction summarizes this manual, PlateMaker 3
features, optional configurations, and the printer warranty.
Chapter 2 — Installation covers printer setup and connection to
Macintosh, PC, and Ethernet interfaces.
Chapter 3 — Macintosh Setup describes the contents and use of
the XANTÉ Utilities CD-ROM for the Macintosh. This includes
installation for the Adobe PostScript printer drivers, your printer’s
PPD, XANTÉ Command Center, and the Adobe Downloader as well
as procedures for using printer features.
Chapter 4 — PC Setup describes the contents and use of the
XANTÉ Utilities CD-ROM for the PC. This includes installation
instructions for the Adobe PostScript printer drivers, your printer’s
PPD, XANTÉ Command Center, and procedures for using printer
features.
Chapter 5 — Ethernet Setup describes EtherTalk, Novell Print
Server, Line Printer, and NetBEUI protocol configuration on the
printer’s optional Ethernet interface.
Chapter 6 — Configuration describes using the front panel keys
and menus and the Print dialog box to configure many printer
features.
Chapter 7 — Media Options describes media sizes and types for
your printer and provides suggestions for creating high quality output
with the various media.
Chapter 8 — Printing with Various Media Types describes the
steps for printing on film, plates, and envelopes.
Chapter 9 — Maintenance and Technical Specifications describes
printer care, technical specifications, XANTÉ service options, and
the printer warranty.