Xante PlateMaker 3, Manual

Page: 290 / 298

11-28 Troubleshooting bb ____________________________________
Clearing a Toner Cartridge Area Jam
Warning: The inside of the printer becomes very hot during
operation. Do not touch any area with a high-temperature
warning label (fig. 11.13) without first turning off the
printer and allowing it to cool for at least 40 minutes.
Note: When the printer is turned off, all print job information still
in memory is lost; the Jam Recover feature cannot print the
last page processed.
CAUTION -
HOT SURFACE VORSICHT -
HEISSE FLACHE PRECAUTION -
SURFACE CHAUDE AVVERTENZA -
SUPERFICIE CALDA CUIDADO -
SUPERFICIE CALIENTE
No toque el rodillo
interior. Non toccare it rullo
interno. Ne pas toucher
le rouleau interne. Beruhren Sie nicht
die innere Walzel.
Do not touch
the inner roller.
Fig. 11.13 High-Temperature Warning Inside the Printer
1. Remove the toner cartridge from the printer by grasping it by
the handles on the top and pulling it slowly out of the printer
(fig. 11.14).
Caution: Once you begin pulling the toner cartridge out of
the printer, remove it completely. The drum
shutter may not open properly if the cartridge is
partially pulled out of the printer and then pushed
back in. This can damage the cartridge or result in
a malfunction.