Xante PlateMaker 3, Manual

Page: 73 / 298

_____________________________________ Macintosh Setup 3-35
d. Select the resolution which you will use to print the final
output in the printer front panel MISC: DPI menu.
e. Click Print Calibration Page (fig. 3.15). The calibration
page shows the printer’s performance using no gamma
curve correction (fig. 3.16).
Note: Print only one calibration page (using the Print
Calibration Page button) at the beginning of the
calibration process. Printing this page again later
in the process resets the calibration, cancelling
any linearization you have already done.
Fig. 3.16 Sample Calibration Page
Using the Densitometer
A densitometer uses a standard light source to measure the amount of
light reflected from printer output. This measurement is compared to
a standard and expressed as a percentage of gray.