Xante PlateMaker 3, Manual

Page: 123 / 298

___________________________________________ PC Setup 4-33
1. Open XANTÉ Command Center and select Controller:
Spooler. The Spooler Window appears (fig. 4.21).
Fig. 4.21 Spooler Window and Job Queue
Note: The Job queue lists the job ID, job status, job title,
spool device, and file size of all jobs in the spooling
queue. Job status can be W (waiting to be processed),
P (currently processing), or H (already processed and
held using the Save Spooled Job feature).
2. Use the Control buttons to manage the jobs in the queue.
Print Prints the highlighted job
Delete Deletes the highlighted job
Delete All Deletes all jobs in the queue
Move to Front Moves highlighted job to top of queue
Refresh Updates screen with current job queue
3. Click Close to exit the Spooler Window; then select File: Exit
to close Command Center.
Calibration with a Densitometer (Gamma)
Your printer’s densitometer support allows you to use gamma curves
to adjust your printer’s performance to eliminate inconsistencies due
to equipment age, to different toners, press inks, and media, and to
environmental conditions.