Xante PlateMaker 3, Manual

Page: 158 / 298

5-18 Ethernet Setup bb ______________________________________
Fig. 5.15 New File Server Window
3. Type in the name of the Novell file server that your printer will
poll for print jobs exactly as it appears in PConsole; then click
OK to return to the main menu.
Note: The printer enters a waiting state while it saves the file
server name. Do not proceed until the printer displays
the
READY/IDLE
message.
4. If you did not use the printer’s default Novell print server
name in file server configuration with PConsole (in “Configure
the Novell Server (NetWare 3.X and 4.X)” see step 4c),
change the print server name to agree with the print server
name set up on the file server.
Note: If you used the printer’s default Novell print server
name (see “Selecting the Novell Names” earlier in this
chapter), this step is not required.
a. Choose Networking: Novell Print Server: Print Server Name.
Fig. 5.16 Print Server Name Window
b. Type in the print server name exactly as it was entered in
the file server configuration using PConsole (in
“Configure the Novell Server (NetWare 3.X and 4.X)”
see step 4.c); then, click Ok to return to the main menu.