Whirlpool ATE0743RPP, Technical Manual

Page: 41 / 92

4-11
9. Remove the four hex-head screws from
the bottom of the fan motor brackets (2 on
each bracket).
8. Using a 5/32
″
allen wrench, loosen the
collar and clamp screws on the condenser
and evaporator fans.
Collar Screw
Condenser
Fan
Clamp Screw
Evaporator
Fan
10. Remove the two hex-head screws from
each of the condenser fan shroud mount-
ing brackets and remove the brackets.
11. Remove the remaining three hex-head
screws from the condenser shroud (1 bot-
tom and 2 side screws).
Fan Motor Bracket Screw (1 of 4)
12. From the rear of the unit, pull the defrost
sensing tube out of the condenser and
from behind the bracket, and move it out of
the way.
13. Remove the two hex-head condenser
mounting screws from the chassis pan.
Brackets &
Screws (2 each)
Condenser
Fan Shroud
Continued on the next page.
Condenser
Screw
Screw
Side Screw (1 of 2)
Bottom Screw
Sensor Tube
Bracket