Whirlpool ATE0743RPP, Technical Manual

Page: 37 / 92

4-7
REMOVING THE CAPACITOR & FAN CYCLE SWITCH
1. Unplug air conditioner or disconnect power.
2. Remove the front cover from the unit (see
page 2-11 for the procedure).
3. Lower the control chassis to access the
components (see page 4-2 for the proce-
dure).
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
Fan Cycle Switch
Capacitor
5. To remove the fan cycle switch:
a) Disconnect the wires from the switch
terminals.
b) Press in on the locking arms and push
the switch out of the control chassis
cutout.
REASSEMBLY NOTE: Make sure that you
position the fan cycle switch with the pin 1
terminal to the left as shown before you rein-
stall it in the chassis cutout.
VT & BK
BU
YL
Locking Arms
Pin 1
2 RD & YL
(Black Ring)
BR
(Green Ring)
BU
(White Ring)
Clamp
Screw
Clamp
Screw
4. To remove the capacitor:
a) Disconnect the wires from the termi-
nals (see the illustrration at the top of
the right column).
b) Loosen the two hex-head screws from
the capacitor clamp and remove the
capacitor from the clamp.