WaxJet 6100, Service Reference Manual

Page: 32 / 131

Embedded Numbers Codes
Embedded codes for Numbers will print desired numbers value for
batch counting or product counting per shift. When the NUMBERS
command was set up, an upper and lower value was set, was well as
an incrementation value. Embedded codes are used to print the
result of the counting operation as part of a message, updating as
photocell triggers occur. Embedded codes for numbers format is
detailed below.
d = variable, for the digit of the counter that is to be printed.
Example of entering an embedded message for Numbers:
{V3V2U1}
This embedded code will print digit 1 each time, digits 2 & 3
when they are not leading zeros, counting up from the LOWER
value set with the NUMBERS command. The LOWER value
and incrementation value is set with the NUMBERS command.
Embedded Codes for Date & Time
{NL} To print the counter as a down counter, all 8 digits
{Ld} To print a specified digit of the counter as a down counter
{Wd} To print a specified digit of the counter as a down counter, unless
it is a leading zero
{NU} To print the counter as an up counter, all 8 digits
{Ud} To print a specified digit of the counter as an up counter
{Vd} To print a specified digit of the counter as an up counter, unless
it is a leading zero
4-6 Programming