LARA | Instructions for use | RIL-1 ENG Rev04 | 28/02/2019 | © 2019 W&H Sterilization Srl
61
Sterilization cycles
SET THE DRYING TIME
The drying time of the AUTO DRY and ECO DRY plus modes is
automatically adjusted to the total amount of load and cannot be
modified (see "Available automatic drying modes" on page 57). To
set a new drying time for the program, you should disabled the AUTO
DRY and ECO DRY plus modes first.
1
On the homepage tap the cycle and
.
2
Select Fixed to disable the
automatic drying mode.
3
Tap the wording Fixed to modify the
fixed mode minutes.
4
Tap
or
to increase the
minutes or decrease them.
Note: for the minimum value of the
drying time for each cycle see
"Sterilization cycles" on page 111.
5
Tap
to confirm and go back to
the previous page. This becomes
the new fixed value.
CHANGE THE DRYING MODE
The AUTO DRY mode is the default one. To activate the ECO DRY plus
mode see "ECO DRY plus mode activation" on page 57.
