42
LARA | Instructions for use | RIL-1 ENG Rev04 | 28/02/2019 | © 2019 W&H Sterilization Srl
Managing printers
AUTOMATIC PRINTING OPTION
The automatic printing option permits to automatically print a
preset number of labels after a successful sterilization cycle. The
labels are printed only after the user has identified him/herself (with
password if required) and the load has been checked and released,
if these options have been enabled by the administrator.
For the automatic label printing, a maximum storage time in weeks
can be set. This value is used to calculate the expiry date to be
printed on the labels (see "Label content description" on page 44).
SET THE AUTOMATIC LABEL PRINTING
1
On the homepage tap
>
>
2
Activate Automatic printing.
3
Tap
or
to set the maximum
storage time and the number of
labels to be printed automatically.
4
Tap
to confirm and go back to
the previous page.
SET THE MANUAL LABEL PRINTING
The manual printing option permits the user at the beginning of a
sterilization cycle to set manually the number of labels to print.
1
On the homepage tap
>
>
2
Activate Manual printing.
3
Tap
to confirm and go back to
the previous page.
