W&H Lara RIL-117 Instructions For Use Manual Download Page 25

Page: 25 / 138

Getting started

Icon

Label

Function

Remote data
storage

Only with a network connection set. Opens the page to
manage the remote storage.

Settings

Only with a network connection set. Sets the parameters
of the network location.

Save all

Only with a network connection set. Copies all the files in
the specified location in the network.

Test

Only with a network connection set. Checks if the files can
be copied to the specified location.

TRACEABILITY MENU FUNCTIONS

Icon

Label

Function

Cycle History

Shows all the sterilization cycles and tests and prints
reports and labels.

Save

Saves all the sterilization cycle reports in the USB pen
drive.

User
Management

Optional, activated with an activation code. Permits
manage the users.

Add User

Administrator only. Adds a user.

Icon

Label

Function

Delete User

Administrator only. Deletes a user.

Reset user PIN
code

Administrator only. Resets a user PIN code.

Change your
PIN code

Changes the PIN code.

Options

Optional, activated with an activation code. Administrator
only. Permits the following:

identify and save the operator who starts the
cycle and releases the load.

Protect with a password the cycle starts, the load
release and the label printing.

Label Printer

Optional, activated with an activation code.

Sets the maximum storage time of the wrapped
sterilized items.

Sets the automatic or manual printing of the
labels.

ACCESSORIES MENU FUNCTIONS

Icon

Label

Function

USB Pen
Drive

Opens the formatting page of the USB pen drive.

Summary of Contents for Lara RIL-117











































































































































Search results

Summary of Contents for Lara RIL-117

Reviews:

Related manuals for Lara RIL-117

Brands by name

Popular brands

W&H Lara RIL-117, Instructions For Use Manual

Search results

Summary of Contents for Lara RIL-117

Reviews:

Related manuals for Lara RIL-117

Brands by name

Popular brands