LARA | Instructions for use | RIL-1 ENG Rev04 | 28/02/2019 | © 2019 W&H Sterilization Srl
31
Getting started
SET THE NETWORK ADDRESS (OPTIONAL)
Refer to your network administrator or IT manager for more
information about your network.
If your network supports dynamic IP, skip this procedure. Otherwise
follow this procedure and enter the data suggested by your network
administrator or IT manager.
1
On the homepage tap
>
>
>
2
In IP Configuration tap Static: the
text boxes are enabled.
3
Enter the data: the frames highlight.
If a frame turns dark grey, check
and correct the entered data.
4
In DNS Configuration tap Static: the
text boxes are enabled.
5
Enter the data: the frames highlight.
If a frame turns dark grey, check
and correct the entered data.
User authentication (optional)
FUNCTION AVAILABILITY
To access the user management functions the Traceability
activation code must be entered. The activation code is required
only at the first access to the User Management (
) or the Options
(
) menus. To acquire the activation code please refer to the
Activation code instructions.
Note: If you have entered the All in One activation code in Special Codes
menu, the function is already available.
PIN MANAGEMENT
PIN “0000” is assigned as default to each new user. It has to be
changed at the first login. When the PIN is reset the default value
“0000” is reassigned.
CHANGE YOUR PIN
Change your PIN the first time you use the sterilizer and if your PIN
has been reset. This will prevent other users to use your account.
