VTI Instruments Ametek EX1200A Series, User Manual

Page: 63 / 165

VTI Instruments Corp.
62 EX1200A Series Preparation for Use
d) Click the Use the following IP address radio button.
e) Enter the desired IP address. If using the IP from the example above, 192.168.1.1 can be
used.
f) If not automatically completed after the IP address is entered, set the Subnet mask field
to 255.255.255.0 .
F
IGURE
2-21: C
OMPLETED
NIC S
TATIC
IP C
ONFIGURATION
g) Click OK to exit the network configuration properties.
T
IME
C
ONFIGURATION
The EX1200A will initially be configured to receive its time through PTP (Precision Time
Protocol). The user can also set time using SNTP (Simple Network Time Protocol) or the time can
be set manually. The manual setting is necessary if the network environment is such that the unit
cannot reach the Internet. For more information, see
Time Configuration in Section 7.