VTI Instruments Ametek EX1200A Series, User Manual

Page: 41 / 165

VTI Instruments Corp.
40 EX1200A Series Preparation for Use
Rackmount Installation, Half Rack Width Option (P/N: 70-0373-103)
The rackmount installation option includes all the parts necessary to mount an EX1202A to the
front and rear of a standard test rack.
Required Tools
1) #2 Phillips screwdriver
2)
5/16” wrench or socket
Parts List
Assembly Procedure
1) Place the chassis on a protected work surface with its input connectors facing front.
2) Using a #2 Phillips screwdriver, install the rack ears (P/N: 41-0482-009 and 41-0493-011) on
the front of the EX1202A using five (5) 6-
32 x 3/8” flat head Phillips stainless steel screws
(P/N: 37-0114-025
) for each rack ear. Note that the “Optional Mounting Locations” in
Figure 2-6 allow the EX1202A to be installed in a rack either flush or recessed.
3) Next, attach the unit support brackets (P/N: 41-0482-010) to the EX1202A using two (2) 6-32
x 3/8” pan head Phillips SEMS screws (P/N: 37
-0028-037) for each bracket (see Figure 2-6).
4) Place the rear rack support brackets (P/N: 41-0482-011) on the inside of the unit support
brackets installed in step 3 and loosely secure them using two (2) 8-
32 x 3/8” pan head
Phillips SEMS screws (P/N: 37-0073-037) and two (2) KEPS hex nuts (P/N: 37-0200-832)
per bracket. Loosely installing the hardware will allow the rear support bracket to adjust to the
proper length once installed in a rack.
5) Place the EX1202A in the desired rack slot and secure the front rack ears with hardware
provided with the rack. Once the front bracket are secured, slide the rear support brackets so
that they can be attached to the rack as well. After securing the rear support brackets, tighten
the screws and KEPS nuts installed in step 4.
Item# Qty Description VTI P/N
1
1 Bracket, Rack Ear, Single Half Rack, EX1202A 41-0493-009
2
1 Bracket, Long Rack Ear, Single Half Rack, EX1202A 41-0493-011
3
2 Bracket, Unit Support, EX1202A 41-0482-010
4
2 Bracket, Rear Rack Support, EX1202A 41-0482-011
5
10 Screw, 6-
32 x ¼”, F/H Undercut Phillips, Zinc
37-0114-025
6
2 Screw, 6-
32 x 3/8” Pan Head Phillips, Sq Cone SEMS Zinc
37-0028-037
7
6 Screw, 8-
32 x 3/8” Pan Head Phillips, Sq Cone
SEMS Zinc 37-0073-037
8
4 Nut, Hex, KEPS, 8-32 Steel/Zinc 37-0200-832