VTI Instruments Ametek EX1200A Series, User Manual

Page: 50 / 165

www.vtiinstruments.com
EX1200A Series Preparation for Use 49
3U M
AINFRAME
I
NSTALLATION
O
PTIONS
EX1208As have three options which can installed prior to installation:

Tabletop Installation Option (P/N: 70-0370-100)

Rack Ear Installation Option (P/N: 70-0370-101)

Rackmount Installation Option (P/N: 70-0370-102)
NOTE These options are not included with the EX1208A system and must be ordered separately.
Tabletop Installation Option (P/N: 70-0370-100)
The tabletop installation option can be used when an EX1208A is not installed in a rack, but will
be employed as a bench top or desktop instrument.
Required Tools
1) #2 Phillips screwdriver
Parts List
Item# Qty Description VTI P/N
1 8
Feet, Corner, Rubber, “L” Shaped
37-0281-200
2 2 Shim, Bottom, Rubber Feet, EX1267/8/9 41-0494-022
3 28 Screw, 6-
32 x 7/16”, Pan Head Phillips, Zinc
37-0044-044
Assembly Procedure
1) Place the chassis on a protected work surface with its input connectors facing front.
2) Using Figure 2-11, locate the installation locations for each rubber foot. Note the location of
the two shims (P/N: 41-0494-022) that are required for the two bottom, front locations.
3) Using the #2 Phillips screw driver, install the eight rubber feet using four (4) 6-
32 x 7/16” pan
head Phillips screws to secure the top and bottom and one (1) 6-3
2 x 1/2” pan head Phillips
screw to secure side of each foot.