86
A100K10652
IP DECT 6000 System Installation & Configuration Guide
13
Configuring the AlphaCom/ACM Exchange
The AlphaCom/ACM exchange has to be configured to be able to
communicate with the Server 6000. This is carried out using the
AlphaPro configuration tool.
The configuration procedures are as follows:
●
Adding a DECT User/Handset
●
Updating the Exchange
To configure the AlphaCom/ACM exchange, start the AlphaPro software
tool on your computer.
)
The following procedure for adding a DECT user/handset is only valid for an
AlphaCom/ACM exchange with AMC board version 10.55 and above.
13.1
Adding a DECT User/Handset
1.
From the AlphaPro menu bar, click the
Users & Stations
icon.
2. Select the directory number corresponding to the handset number
that was registered on the Server 6000.
3. Check the
SIP Station
checkbox.
4. Enter the text of your choice in the
Display Text
field.
5. Click
OK