48
A100K10652
IP DECT 6000 System Installation & Configuration Guide
- Domain Name System), enter the IP address of the DNS server
(optional).
9. In the
Server
field (under
NTP
- Network Time Protocol), enter the
IP address of the NTP server from which the system will obtain the
current time (optional).
10. From the
Time Zone
dropdown list, select the desired time zone
(optional).
11. For
UPnP
(Universal Plug and Play) leave both
Enabled
and
Broadcast announcements
with their default values (optional).
12. Click
Save
to save your general configuration data.
8.4.2
Wireless Server Configuration
On the
Configuration > Wireless Server
page, you can configure
the Server 6000 to allow subscription. If the system does not allow
subscription, it is not possible to subscribe a handset.
To configure the Server 6000:
1. Click
Configuration
, and then click
Wireless Server
.
2. Check the
Subscription Allowed
checkbox.
-
If this is not checked, you cannot subscribe a handset.
3. Uncheck the
Autocreate users
checkbox
4. Enter an access code in the
System access code
field (optional)
5. Check the
Send date and time
checkbox (optional)
6.
For all the fields under
Application interface
leave them with their
default values.
7. Click
Save
.
8.4.3
SIP Configuration
On the
Configuration > SIP
page, you can define general SIP settings,
information about authentication, DTMF signalling, message waiting
indication and media.
1. Click
Configuration
, and then click
SIP
.
