29
IP DECT 6000 System Installation & Configuration Guide
A100K10652
To install and mount the repeater:
1. Connect the power supply cable into the RJ11 connector at the
bottom of the repeater.
2. Mount the repeater onto the wall using the screws accompanying the
repeater.
6.3 Recording the Installation Information
After completing the installation of the repeaters, record the location of
each repeater.
6.4 Checking Indicators
Verify that the repeater LED indicator is steadily on, indicating that the
repeater is functioning.
6.5 Powering the Repeater
6.5.1 Power Options
The power supply for the repeater is 9VDC, 300mA.
6.6 Programming a Repeater with the Programming
Kit
6.6.1 Contents of the Repeater Programming Kit
The Repeater Programming Kit (part no. 2211050130) comprises:
●
splitter
●
serial cable
)
For programming the repeater you also need the ServiceTool programming
software and the power supply for the repeater. ServiceTool is not part of the
Repeater Programming Kit and is available as a download from the STENTOFON
AlphaWiki website. The power supply for the repeater is ordered separately (part
no. 2211050200).
Figure 17 Repeater Programming Kit
