40
A100K10652
IP DECT 6000 System Installation & Configuration Guide
7.3.2 Charging the Battery
7.3.2.1 EX Handset
When charging the battery for the first time, it is necessary to leave
the handset in the charger for 14 - 16 hours for the battery to be fully
charged and the handset ready for use.
)
Normally, it takes approximately 3½ hours to charge the handset to its full capacity
starting from being completely discharged.
To charge the battery:
●
Place the handset in the charger.
For correct charging, ensure that the room temperature is between
0°C/32°F and 25°C/77°F. Do not place the handset in direct sunlight. The
battery has a built-in heat sensor which will stop charging if the battery
temperature is too high.
If the handset is turned off when placed in the charger, only the LED
indicates charging. When the handset is turned off, the LED flashes at
a low frequency while charging and lights steadily when the charging is
finished. There will be no reaction for incoming calls.
If the handset is turned on when charging, the display shows the
charging status. It will not vibrate and B-answer is inactive. The handset
reacts normally for incoming calls. The display goes back to normal
mode when fully charged.
It is necessary to recharge the battery when the display shows
“BATTERY LOW” or if the handset cannot be turned on. When the
battery is fully discharged, up to 10 minutes may pass before charging
begins (display lights up). When the charger begins the charging, the
status is shown on the display if the handset is turned on.
The handset displays a progress indicator bar that shows how fully
charged the battery is.
The handset LED has the following indication:
●
LED steadily on = handset is fully charged
● LED flashing = handset is charging
7.3.2.2
Rough/Office Handset
When charging the battery for the first time, it is necessary to leave
the handset in the charger for 14 - 16 hours for the battery to be fully
charged and the handset ready for use.
)
During normal operation, it takes approximately 4 hours to charge the handset
from being fully discharged to its full capacity.
To charge the battery:
●
Place the handset in the charger.
For correct charging, ensure that the room temperature is between
0°C/32°F and 40°C/104°F. Do not place the handset in direct sunlight.
The battery has a built-in heat sensor which will stop charging if the
battery temperature is too high.
