58
A100K10652
IP DECT 6000 System Installation & Configuration Guide
The data configured for each handset can be split into two categories:
DECT data which is necessary for the correct handling of the DECT
protocol stack, and SIP data which is necessary for the handling of a SIP
user agent.
,
For Rough/Office handsets, it is NOT necessary to enter the IPEI number
as the auto-subscription feature will locate the IPEI numbers automatically.
3. In the
IPEI
field, enter the IPEI number (serial number) of the
EX
handset
.
-
The serial number consist of a five-digit handset type (manufacturer
code) and a seven-digit handset number.
-For more general information about the IPEI number (serial
number) and how to retrieve it, refer to “Retrieving the Serial
Number of the Handset”.
-
To view the IPEI number for EX handset, enter
*99984*
and then
press
a
- the number starts with 00077...
4. In the
Access code
field, enter the authentication code (AC)
(optional)
-The authentication code is a subscription password of a maximum
of eight digits, defined by the technicians and can be used when
connecting the handset to an Server 6000. The authentication code
is a subscription PIN code for the individual handset.
5. In the
Standby text
field, enter a text to be displayed when the
handset is on hook (optional).
6. In the
Username/Extension
field, enter a directory number.
-
The value of this field should be the same as the AlphaCom/ACM
directory number.
7. Leave the
Domain
field blank.
8. In the
Displayname
field, enter the name to be displayed (caller ID),
e.g. John Doe in John Doe<sip:[email protected]> (optional).
9. In the
Authentication user
field, enter a directory number (optional).
-This should be the same as the directory number registered in the
AlphaCom/ACM exchange.
-The user name will override the
Default user
field under
SIP
Configuration
(refer to “SIP Configuration”).
10. Leave the
Authentication password
field blank.
-
This is not necessary for an AlphaCom/ACM configuration.
-The password will override the
Default Password
field under SIP
Configuration (refer to “SIP Configuration”).
11. Uncheck the
Disabled
checkbox.
12. Click
Save
to save the registration data.
13. Click
OK
on the next page.
