51
IP DECT 6000 System Installation & Configuration Guide
A100K10652
8.4.4 Rebooting the Server 6000
After SIP configuration has been carried out, you should reboot the
Server 6000 in the
Administration > Wireless Server
page.
To reboot:
1. Click
Administration
, and then click
Wireless Server
.
2. Click
Reboot
next to
Wireless Server Uptime
.
)
After rebooting, change the IP address of your computer to one that is in the same
LAN range as that of the Server 6000 or set the TCP/IP properties to obtain an IP
address automatically.
8.4.5
Security Configuration
It is possible to change the password for the Server 6000 from the
Configuration > Security
page.
1. Click
Configuration
, and then click
Security
.
2. In the
Current password
field, enter the current password.
3. In the
New username
field, enter a new username.
4. In the
New password
field, enter a new password.
5. In the
New password
again
field, re-enter the new password.
6. Uncheck the
Force secure HTTP (TLS)
checkbox.
7. Uncheck the
Allow remote logging
checkbox.
8. Click
Save
.
8.5 Checking the LED Indicator
Verify that the Server 6000 LED is lighting a steady green, indicating that
it is now operational.
